Blog / Wink Of Stella

DT Deni - Animals 3

Hi guys, Dt Deni here, I was asked by a friend to make some cards for her Aunty and Mum. They just fit the animal theme perfectly so thought I would share them here also. Oh - and I was actually writing down what I was writing while I was making which I don't do normally unless i'm specifically working on something for a Design Team.

Anyway, I used two stamp sets from My Favorite Things, I used Farm-tastic and PI Green Pastures. They worked so perfectly together. I inked the images up using Memento Tuxedo Black, stamped them using my Misti Stamping Tool on 250GSM Mondi Color Copy.

I coloured the images using Copic Markers which will be listed below with the product list. I first stamped the PI Green Pastures, I then masked off the sections I was planning on stamping over using Post It Notes. I then stamped the animals (whether it be the Pig or The Chicken), I cut a mask for the animals and then stamped the fence. I cut the scene out using a Lawn Fawn Stitched Square die on my Sizzix Big Shot. I then stamped the sentiment onto a scrap of Black cardstock using Versamark Watermark Ink (I prepped the cardstock first using a Powder Tool), I added the Ranger embossing powder in white and melted it using my heat tool. Papers are from Kaisercraft Cock-a-Doodle-Doo, the blue cardstock is Canson. I also cut out the blue 50 using the Canson Cardstock MFT Little Numbers. I coated the numbers using Wink Of Stella Clear Glitter Brush, everything was attached using Tombow Mono Multi Liquid Glue and Scotch ATG. Copic Markers Used E000, E00, E21, E11, E04, R20 E30, Y23, E33, Y26 B91, B93, B95, W1 G40, G43, G46 C0, YR18, YR09 E70, E71, E74, E77 E25, E27, E29 R24, R27, R29, 0 V04, V06, V09, 0 RV00, RV32, RV34 Products Used On This Card Twiddleybitz Card Base Uniball Signo - Noble Metal, White Angelic Versamark - Watermark Stamp Pad MFT Little Numbers Wink Of Stella - Clear Tombow Mono Multi Ranger Embossing Powder - White MFT - Farm-tastic MFT Green Pastures Lawn Fawn - Stitched Squares Kaisercraft - Cock-a-Doodle-Doo EK Success Powder Tool Memento Tuxedo Black Scotch ATG Tombow Mono Multi

Posted on September 15, 2017

Neha Aggarwal

DT Deni - June Stencils

Good Morning Everyone, it's a very chilly one in Sydney Australia this morning brrrr. So my typing is a little slower than normal whilst my fingers thaw out lol.

June is Stencil month here at Auzz Trinklets N Crafts, and another one of those things I like to hoard and not use so much, i've had this My Favorite Things English Brick Wall Stencil for quite a while now and pretty sure I have never used it. When I went looking for a stamp set to use for this month I decided to use the Playful Pups from My Favorite Things, after stamping and colouring and also die cutting I then decided to go looking through my stencils to find something that would co-ordinate and create me a card. The brick wall jumped at me and that's what I decided to do. I taped a piece of white cardstock to my desk mat using Washi Tape and used a mixture of Distress Mini Ink Cubes and a mini ink blender to create the background.

I cut the little hill/ground section using Lawn Fawn Stitched Hillside Borders die and some Kraft Cardstock scraps. I then grabbed some white cardstock scraps and cut the word "Congrats" using Scripty Congrats word die from Lawn Fawn. The sentiment is cut using Lawn Fawn Everyday Sentiments dies and the sentiment is stamped using Lawn Fawn Blue Jay ink, the sentiment is from Sunny Studio - Baby Bear stamp set.

Everything is adhered together using either Tombow Mono Multi Liquid Adhesive or Scotch ATG. Trimming is all done on my Cutterpillar Pro, and die cutting on Sizzix Big Shot.

Products Used My Favorite Things Playful Pups & Dies My Favorite Things English Brick Wall Stencil Lawn Fawn Stitched Hillside Borders Sizzix Big Shot Cutterpilla Pro Lawn Fawn Blue Jay Ink Lawn Fawn Everyday Sentiments Dies Lawn Fawn Scripty Congrats Sunny Studio - Baby Bear Lawn Fawn Acrylic Blocks Tombow Mono Multi Liquid Adhesive Wink Of Stella- Clear Ranger Mini Ink Blender Ranger Mini Distress Ink Cubes Thanks for Stopping By and I hope you enjoyed my card today DT Deni.

Posted on June 14, 2017

Neha Aggarwal

DT Teresa - Shabby Chic 2

Hello!

I have another shabby chic project to share with you today, catching up now!

This card uses Neenah Classic Crest 110lb Smooth Solar White Cardstock for the base which is cut with a paper trimmer at 4 1/4" x 11" and scored with a teflon bone folder at 5 1/2" to make a top folding card of 5 1/2" x 4 1/4".

I used the scalloped frame from My Favorite Things Blueprints 20to place on the card base, moving it slightly above the fold of the card to create a top folding scalloped base card once it was run through theSizzix Bigshot. I then used the same frame die to cut a piece from Simon Says Stamp cardstock in Audrey Blue and adhered this to the partially scalloped card base. This covered the top fold of the card base - as the frame die was moved above the card base before cutting to retain the fold, the edge was flat. Using the coloured cardstock allowed the opportunity for a complete scalloped card front. Using Versamark Ink, I stamped a floral image from The Ton Fresh Cut Dahliasstamp set numerous times onto the card, providing a subtle background.

I used Neenah Classic Crest 80lb Smooth Solar White Cardstock and stamped various images from Hero arts Color Layering Bird and Branch and WPlus9 Fresh Cut Florals to create my own patterned cardstock piece. Altenew Inks provided a wonderful feminine, pastel pallet using Frosty Pink, Buttercream, Frayed Leaf and Peach Perfect. From this I cut a teapot, teapot lid and teacup from My Favorite Things Dienamics Tea Party and placed aside.

I then die cut multiple (7-8) tea pots, lids, teacups and (42-48) sugar cubes with the dies from plain white cardstock and adhered the pieces together using Ranger Multi Medium Matte to make sturdy embellishments. Before adding the top stamped piece of the tea pot lid and tea cup I cut away a small area of the plain adhered pieces with myTim Holtz scissors to allow the pieces to sit flush over the top of the teapot. I then added the top piece and glued the teapot, lid, cup and sugar cubes into place using Ranger Ink Multi Medium Matte.

After brushing over the area to be stamped with an EK Tools powder tool, the sentiment stamp from My Favorite Things Cookie Crumbs was cut apart and stamped in Versamark Ink with my MISTI stamping tool. I used Hero Arts white embossing powder for a stand out sentiment, paired with a Wagner Heat Tool.

I die cut a spoon with My Favorite Things Dienamics Tea Party from a silver foiled piece a had previously made from Heidi Swapp Minc Reactive Foil using a Heidi Swapp Minc Machine. I cut away the lower half of the spoon and placed the handle section against the top of the teacup, adhering it to the card base and giving the illusion of it sitting inside the cup.

The sugar cubes were then swiped with the wonderful Zig Wink of Stella in Clear to provide a shimmer and a sparkle! Finally, I placed some lovely fabric flowers onto the teapot. An elegant, feminine card is the result and would make a great Mother's Day card also.

Thankyou for following along with me today. Please feel free to ask questions if anything needs clarifying. If you cannot find the items I have used (listed below) in the Auzz Trinklets and Crafts store, be sure to drop Neha a message via email or Facebook and she will do what she can to order the product in for you.

Happy crafting and have a great day!

Teresa Products used: Neenah Classic Crest 110lb Smooth Solar White Cardstock

Paper trimmer

Teflon bone folder

My Favorite Things Blueprints 20

Sizzix Bigshot Machine

Simon Says Stamp cardstock in Audrey Blue

Versamark Ink

The Ton Fresh Cut Dahlias

Neenah Classic Crest 80lb Smooth Solar White Cardstock

Hero Arts Color Layering Bird and Branch

WPlus9 Fresh Cut Florals